Skip to main content

Power supply

Reach RS/RS+ has built-in LiFePO4 battery providing 30 hours of operating time.

Charging over USB#

You can power and charge Reach RS/RS+ over the micro-USB cable using power supplies like:

  • Power bank
  • USB wall adapter

Powering Reach RS/RS+ from the external connector#

note

Works only for Reach RS+

Reach RS+ can automatically turn on when the power is supplied to the device via an external 9-pin bottom connector with a voltage in the range from 5V to 40V.

To charge the receiver 5 watts is required. For operating, 7.5 watts on average is required (10 watts maximum).